You will find the attachment nut bolts of the finderscope inside the primary telescope tube. Step 3: Attach The Remaining Telescope Accessoriesīring out the red dot finderscope from the packaging of the product. The final step involves reattaching the thumb nuts to the primary bolt attachments, which should be implemented after the computerized star locator assembly and the primary telescope tube are assembled. Tip: the Bushnell NorthStar logo will be right-side up. You must be careful while carrying out this stop and ensure that the telescope is pointing in the right direction. You will find these nuts on the side of the telescope tube.Īttach the primary bolts of the tube attachment inside the bracket of the telescope tube, which will find on the top part of the computerized star locator assembly. Then you must remove the thumb nuts needed to fix the tube onto its position. Identify and then bring out the telescope’s main tube from the packaging. Once you are done, use the clamp to fix the tripod legs shut. Gently turn the accessory tray until it has snapped towards its designated place.īring out the tripod legs and adjust them to a suitable position by opening its lever, which will help you change the tripod’s height. Then you need to spread the legs of the tripod towards a comfortable distance.Īfter that, you must fold the accessory tray down on the ground and put the ‘quick release accessory tray’ on the top of your braces. Step 1: Setup Tripod And Accessory TrayĪt first, we need to locate the computerized star locator assembly and attach this to the tripod stand in an upright and balanced position. Therefore, attention must be given to the eyepieces, computer, and telescope. Then you need to identify all the parts to know when to attach each part.Īs this telescope relies on a precision optical system, you must be very careful while handling all the parts during assembly. Just remove all the components from the packaging and keep them in an organized fashion. How To Use The Bushnell NorthStar Telescopeįirst, you don’t need to use any tools to assemble the parts of your Newtonian telescope. The magnifying eyepiece, which uses high power, is best for viewing the Moon and other planets. These could be star cluster systems or huge galaxies emitting a continuous light array. The eyepiece that uses low power is most optimal for viewing very large and extended objects. There is a low-powered eyepiece and a high-powered eyepiece. This company includes two sets of magnifying eyepieces, a tripod, a Barlow lens, and a finder’s scope along with its telescope. These telescopes use a two-mirror optical system to gather all the light entering its tube and then direct this light to a magnifying eyepiece. The Bushnell NorthStar Telescope is a Newtonian reflector telescope. Overview Of The Bushnell NorthStar Telescope Moving On To The Higher Power Eyepieces.How To Experience Your Bushnell NorthStar Telescope In An Enjoyable Way?.Step 3: Attach The Remaining Telescope Accessories.Step 1: Setup Tripod And Accessory Tray.How To Use The Bushnell NorthStar Telescope.Overview Of The Bushnell NorthStar Telescope.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |